NetVanta 5305
NetVanta Octal T1/E1 Wide Module (P/N 1200843L1)
The NetVanta Octal T1/E1 Wide Module (shown in Figure 6) provides eight T1 interfaces with RJ-48C wire
connections. These interfaces can be used independently or as aggregate bandwidth using Multi-Link PPP
protocol. Up to six T1/E1 Wide Modules may be used simultaneously in the NetVanta 5305 chassis. The
T1/E1 Wide Module may be installed in any slot (1-6). Table C on page 28 gives the pinout for this module.
Features and Specifications
Interface
•
RJ-48C
•
Line Rate:
•
Capacity:
•
Line Codes:
•
Framing:
•
Line Build-Out:
•
Input Signal:
Agency Approvals
•
FCC Part 15/Class A
•
UL 60950/CSA C22.2 No. 60950
•
FCC Part 68/ACTA
•
Industry Canada
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: up to 95% Noncondensing
61200990L1-34C
Figure 6. NetVanta Octal T1/E1 Wide Module
1.544 Mbps +/- 75 bps
Eight T1 circuits
AMI or B8ZS
D4 (SF) or ESF
0,- 7.5, -15, -22.5 dB
0 to -36 dB (DS-1)
Support for Nx64 on all T1 interfaces (1-8)
Support for Nx56 on T1 interfaces (1-7)
© 2004 ADTRAN, Inc.
Hardware Installation Guide
21