ADTRAN Atlas 550 System Manual page 306

Section 4 User Interface Guide
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Configures the compression algorithm used on the selected packet voice endpoint. The default
compression algorithm in the FSU and Express 52XX series is G.723.1. Valid codecs for the VCOM
Module include
G.723.1
and . The ADPCM-32 Module will only operate with another ATLAS containing an
T
RANSPARENT
ADPCM-32 Module. Both endpoints must agree on the selected compression algorithm.
The ADPCM-32 Resource Module will not interoperate with the FSU and Express series
products.
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Reduces the total system bandwidth load by preventing ATLAS from sending frames containing a special
silence code during periods of silence. Both endpoints must agree to use silence suppression. By default,
silence suppression is
D
system bandwidth,
E
NABLE
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Selects the type of signaling that the remote port is configured to expect. Available options include the
following:
E&M I
MMEDIATE
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines whether or not Direct Inward Dialing (
then the following options must be configured:
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines the number of digits ATLAS 550 send to the user equipment.This field only displays if
is
I D E
NWARD IALING NABLED
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines the number ATLAS uses to provide Caller ID to the network for outgoing calls sent through this
endpoint. This field only displays if
Setting this menu item is optional.
306
) > U T > I
SER ERM
and . Valid codecs for the ADPCM-32 Module include
N C
ET ODER
) > U T > I
SER ERM
. To prohibit silence frames from transmitting and to decrease the total
ISABLED
this feature.
) > U T > I
SER ERM
and
, E&M W , L
INK OOP
) > U T > I
SER ERM
) > U T > I
SER ERM
.
) > U T > I
SER ERM
D I
IRECT NWARD
© 2004 ADTRAN, Inc.
C > V
FCE ONFIG OICE
C > S
FCE ONFIG ILENCE
C > S
FCE ONFIG IGNALING
.
S
TART
C > D
FCE ONFIG IRECT
is used by the remote equipment. If
DID)
C > DID D
FCE ONFIG
C > C
FCE ONFIG ALLER
is set to
D D
IALING ISABLED
ATLAS 550 System Manual
C
OMPRESSION
G.711
S
UPPRESSION
M
ETHOD
I D
NWARD IALING
is enabled,
DID
T
IGITS RANSFERRED
D
ID N
UMBER
, and is selected.
U T
SER ERM
61200305L2-1B
, ,
G.726
IRECT