DLP-11 Loading a Configuration Using XMODEM
Introduction
The ATLAS 550 supports configuration uploads from a unit via the
VT100 terminal or terminal emulator (with XMODEM). This DLP provides the steps for a successful
configuration upload using either the
Tools and Materials Required
•
VT100 terminal or PC with VT100 terminal emulation software
•
XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
61200305L2-1A
or
port and XMODEM.
ADMIN
CRAFT
© 2004 ADTRAN, Inc.
or
interface using a
ADMIN
CRAFT
337