ADTRAN Atlas 550 System Manual page 86

Section 4 User Interface Guide
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Controlled Slip Seconds (CSS)
parameter. The default value is 1 for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Path Code Violations (PCV)
parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. The default value is 72 framing
errors for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Path Code Violations (PCV)
parameter, when the Line Type is Extended Super Frame DS1. The default value is 13,296 CRC errors for an
approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Line Errored Seconds (LES)
parameter. The default value is 65 for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Line Code Violations (LCV)
parameter. The default value is 13,340 for an approximate BER level of 10E-5.
S C > SNMP > DS1 T
YSTEM ONFIG
Write security: 3; Read security: 5
Defines performance threshold values for DS1 Line and Path statistics. Refer to the ADTRAN Enterprise
MIB and DS1 Extension MIB (available on the ADTRAN website at www.adtran.com) for more MIB
specific information. If a statistic value exceeds its threshold value, then the corresponding Alert Trap will
be sent if the Alert Event is armed and Alert Traps are enabled. These thresholds apply to all DS1 interfaces
in the system.
S C > SNMP > DS1 T
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Total Errored Seconds (ES) parameter. The default
value is 648 for an approximate BER level of 10E-5.
S C > SNMP > DS1 T
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Total Severely Errored Seconds (SES) parameter.
The default value is 100 for an approximate BER level of 10E-5.
86
P T
URRENT ERF HRESHOLDS
P T
URRENT ERF HRESHOLDS
P T
URRENT ERF HRESHOLDS
P T
URRENT ERF HRESHOLDS
P T
URRENT ERF HRESHOLDS
P T
OTAL ERF HRESHOLDS
P T
OTAL ERF HRESHOLDS
P T
OTAL ERF HRESHOLDS
© 2004 ADTRAN, Inc.
ATLAS 550 System Manual
> C CSS T
URRENT
> C PCV T
URRENT
> C PCV T
URRENT
> C LES T
URRENT
> C LCV T
URRENT
> T ES T
OTAL HRSH
> T SES T
OTAL HRSH
HRSH
(D4)
HRSH
(ESF)
HRSH
HRSH
HRSH
61200305L2-1B