ADTRAN Atlas 550 System Manual page 304

Section 4 User Interface Guide
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Configures the compression algorithm used on the selected packet voice endpoint. The default
compression algorithm in the FSU and Express 52XX series is G.723.1. Valid codecs for the VCOM
Module include
G.723.1
and . The ADPCM-32 Module will only operate with another ATLAS containing an
T
RANSPARENT
ADPCM-32 Module. Both endpoints must agree on the selected compression algorithm.
The ADPCM-32 Resource Module will not interoperate with the FSU and Express series
products.
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Reduces the total system bandwidth load by preventing ATLAS from sending frames containing a special
silence code during periods of silence. Both endpoints must agree to use silence suppression. By default,
silence suppression is Disabled. To prohibit silence frames from transmitting and to decrease the total
system bandwidth,
E
NABLE
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Selects the type of signaling that the remote port is configured to expect. Available options include
I , E&M W ,
MMEDIATE INK
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines whether Direct Inward Dialing (
following options must be configured:
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS from the network if
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as a part of the DID number. ATLAS uses the
combination of prefix and DID number to determine the user endpoint that should receive the incoming
call.
D P (P V
IAL LAN KT OICE
Write security: 3; Read security: 5
Determines which user endpoint should receive the incoming call when the network connection does not
provide DID digits. This field only displays if
304
) > N T
ETWORK ERM
and . Valid codecs for the ADPCM-32 Module include
N C
ET ODER
) > N T
ETWORK ERM
this feature.
) > N T
ETWORK ERM
and .
L S
OOP TART
) > N T
ETWORK ERM
) is used by the remote equipment. If
DID
) > N T
ETWORK ERM
) > N T
ETWORK ERM
) > N T
ETWORK ERM
D
© 2004 ADTRAN, Inc.
> I C > V
FCE ONFIG
> I C > S
FCE ONFIG
> I C > S
FCE ONFIG
> I C > D
FCE ONFIG
> I C > DID D
FCE ONFIG
D
IRECT
> I C > DID P
FCE ONFIG
> I C > T
FCE ONFIG
is set to
I D
IRECT NWARD IALING
ATLAS 550 System Manual
C
OICE OMPRESSION
G.711
S
ILENCE UPPRESSION
M
IGNALING ETHOD
I D
IRECT NWARD IALING
is enabled, then the
DID
T
IGITS RANSFERRED
is
I D E
NWARD IALING NABLED
REFIX
N
RUNK UMBER
.
D
ISABLED
61200305L2-1B
, ,
G.726
E&M
.