ADTRAN Atlas 550 System Manual page 283

ATLAS 550 System Manual
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
Defines to the ATLAS 550 the type of signaling to be used across this trunk. The signaling selected needs
to match the signaling being provided by the network (PSTN). The available choices are
.
G S
ROUND TART
The ATLAS 550 converts signaling types between two endpoints (network or user terms).
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
In Loop Start applications,
flowing once the far end has terminated the call. Applications requiring Forward Disconnect are Fax
Servers and ACDs.
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
Defines to the ATLAS 550 whether Direct Inward Dialing (
, then the following information must be defined:
E
NABLED
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS 550 from the network if
if is set to
DID E
NABLED
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
Defines the number the ATLAS 550 uses to provide caller ID to the network for outgoing calls sent
through this endpoint. This item is optional.
The Caller ID number must be specific (i.e., no "wild cards").
D P (FXS) > U
IAL LAN
Write security: 3; Read security: 5
Strips a selected quantity (choose from
number prior to being forwarded out of the port.
Example: A network port could be set to accept all calls beginning with 9 (9$), and then with
set to , all digits would be sent toward the network except the leading 9.
1
S MSD
TRIP
are subsequently stripped) are used as accept criterion.
61200305L2-1B
T > I C
SER ERM FCE
T > I C
SER ERM FCE
F D
ORWARD ISCONNECT
T > I C
SER ERM FCE
T > I C
SER ERM FCE
.
T > I C
SER ERM FCE
T > I C
SER ERM FCE
N , 1, 2,
ONE
does not affect
C
ALL
© 2004 ADTRAN, Inc.
> S
ONFIG IGNALING
> F D
ONFIG ORWARD
configures the length of time loop current will stop
> D I
ONFIG IRECT NWARD
) is being used by the network. If
DID
> DID D
ONFIG IGITS
DID
> C ID N
ONFIG ALLER
> S MSD
ONFIG TRIP
and ) of the Most Significant Digits (MSD) of a dialed
3
criteria. All of the digits (including the MSDs that
A
CCEPT
Section 4 User Interface Guide
M
ETHOD
L
OOP
ISCONNECT
D
IALING
T
RANSFERRED
is used. This option only displays
UMBER
S
or
S
TART
is
DID
MSD
TRIP
283