ADTRAN Atlas 550 System Manual page 182

Adtran atlas 550: user guide
Hide thumbs Also See for Atlas 550:
Table of Contents

Advertisement

Section 4 User Interface Guide
M
(ADPCM-32) > C
ODULES
Read security: 5
Indicates the resource number of the packet voice device listed. On the ATLAS 550, packet voice devices
are numbered 1-24.
M
(ADPCM-32) > C
ODULES
Write security: 3; Read security: 5
Controls the configuration state of the individual packet voice device. The ATLAS 550 determines the
initial configuration state of each device. ATLAS uses this configuration information to determine which
packet voice devices are functional and may be used, which are defective and should not be used, or which
are not present on the module and should not be used.
Users who suspect an individual packet voice device of improper operation can manually disable that
device to prevent ATLAS from attempting to use it. The possible states are defined below.
D
EFERRED
A
VAILABLE
D
ISABLED
M
(ADPCM-32) > S
ODULES
Write security: 5; Read security: 5
These options initiate different types of tests and display test results.
M
(ADPCM-32) > S
ODULES
Read security: 5
Indicates the resource number of the packet voice device listed. On the ATLAS 550, packet voice devices
are numbered 1-24.
M
(ADPCM-32) > S
ODULES
Read security: 5
Measures the total elapsed time that a packet voice device has the status
millisecond precision. Available packet voice devices are assigned new connections using a round-robin
technique where all other available packet voice devices must be used before a given device is assigned a
new connection. This scheme tends to use all packet voice devices evenly. If a given device shows
significantly less elapsed usage time than other packet voice devices on the same ATLAS 550, that device
may be faulty.
182
> C
ONFIG
ONFIGURE
> C
ONFIG
ONFIGURE
Devices which fail built-in testing are automatically marked as
, indicating that the ATLAS 550 declines to use the device.
D
EFERRED
The device is properly functioning and can be used when required. The
ATLAS 550 automatically marks devices that pass built-in testing as
.
A
VAILABLE
Marking a device as
D
attempting to use it. You can mark a device currently in use as disabled
without disturbing the connection, but the device will not be eligible for
use in future calls until you re-mark it as
you suspect that a particular device is malfunctioning and do not want
any calls routed to it.
TATISTICS
> D
TATISTICS
EVICE
> U
TATISTICS
SAGE
© 2004 ADTRAN, Inc.
ATLAS 550 System Manual
ADPCM-32 D
EVICES
ADPCM-32 D
EVICES
prevents the ATLAS 550 from
ISABLED
A
VAILABLE
T
IME
. The time is expressed with
B
USY
> D
EVICE
> S
TATE
. This is helpful if
61200305L2-1B

Advertisement

Table of Contents
loading

Table of Contents