ADTRAN Atlas 550 System Manual page 66

Section 4 User Interface Guide
You can view the terminal windows in two ways: with fields and submenus displaying horizontally across
the right pane, or with fields and submenus displaying vertically down the right pane. Viewing submenus
vertically rather than horizontally allows you to see information at a glance rather than scrolling
horizontally across the window. To change the view, move your cursor to an index number and press
<Enter>. Figure 2 shows this alternate view. Fields and submenu names may vary slightly in this view.
Window Pane Navigation
Use the following chart to assist you in moving between and within the two window panes.
To do this...
Move from left pane to right pane
Move from right pane to left pane
Move within each pane
Right Window Pane Notation
The right window pane shows the contents of the currently selected menu. These contents include both
submenu items and data fields. Some submenus contain additional submenus and some data fields
contain additional data fields. The following chart explains the notation used to identify these
additional items.
This notation...
[+]
[DATA]
<+ >
Highlighted menu item
Underlined field
66
Figure 2. Alternate Menu View
Press this key...
Tab, Enter, or Right arrow
Tab, Escape, Left arrow, or Backspace
Up arrow, Down arrow, Left arrow, or Right arrow
Means that...
More items are available when selected
More items are available when selected
An action is to be taken, such as activating a test
You can enter data in this field
The field contains read-only information
© 2004 ADTRAN, Inc.
ATLAS 550 System Manual
61200305L2-1B