System Utility - ADTRAN Atlas 550 System Manual

Section 4 User Interface Guide
S U
YSTEM TILITY
Use the
S U
YSTEM TILITY
S U > U
YSTEM TILITY
Write security: 1; Read security: 5
Updates firmware when ATLAS 550 enhancements are released. Two transfer methods are available for use in
updating any modules that contain Flash memory—including the ATLAS 550 system controller. The first
transfer method uses the ATLAS 550 serial
protocol. The second transfer method uses the ATLAS 550 built-in
and Trivial File Transfer Protocol (TFTP). For more details on updating firmware, please refer to DLP-6 and
DLP-7.
S U > U
YSTEM TILITY
Write security: 1; Read security: 5
Displays the slot you selected for firmware updating. When this option first appears,
displays. When you move the cursor to this field and press <Enter>, a dialog box opens, allowing you to
select (ATLAS 550 system controller),
S 0
LOT
through
S 1 S 4
LOT LOT
module is installed), or
S U > U
YSTEM TILITY
Write security: 1; Read security: 5
Reflects the module type selected in
92
menu to view and set the system parameters shown in Figure 6.
Figure 6. System Utility Menu
F
PDATE IRMWARE
CRAFT
F > M
PDATE IRMWARE
N
(if an upgradable module is installed),
A M T
LL ODULES OF A YPE
F > M
PDATE IRMWARE
M S
ODULE
© 2004 ADTRAN, Inc.
or port of the system controller and XMODEM
ADMIN
ETHERNET
S
ODULE LOT
or (if an upgradable network module is installed),
1 2
TWK
through
R 1
SRC
.
T
ODULE YPE
. The selections only include upgradable modules.
LOT
ATLAS 550 System Manual
port of the system controller
N S
ONE ELECTED
(if an upgradable resource
4
61200305L2-1B