ADTRAN Atlas 550 System Manual page 338

Section 5 DLP-11
Perform the following steps in the order listed.
1. Connect to the ATLAS 550 using the back panel's RJ-48 ADMIN or front panel's DB-9 CRAFT
interface.
If you are not already connected to the unit's
VT100 compatible terminal or with a PC running VT100 emulation software, follow the procedure in
DLP-1, Connecting a VT100 Terminal or PC to the ADMIN or CRAFT Port. Connecting to the
or interface limits the configuration transfer procedure to XMODEM only.
CRAFT
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the ATLAS 550, for details).
3. Go to the S U
YSTEM
4. Set the T M
RANSFER
5. Select L U
OAD AND
ATLAS 550 for the transfer download.
The ATLAS 550 system is rebooted immediately after a configuration is successfully
loaded. No additional confirmation is requested, and any online sessions will be
terminated.
When the ATLAS 550 is ready to receive the XMODEM configuration file, the menu screen clears and
displays Awaiting XMODEM Upload....<Ctrl-X> twice to Cancel. If this does not appear, please
review the preceding steps above for possible configuration errors.
6. From the terminal emulation software, begin the XMODEM transfer by using the appropriate command
sequence. For Windows HyperTerminal, select T
path) and select XMODEM as the transfer method. ATLAS 550 configuration files should have a .cfg
extension.
If necessary, refer to the terminal emulation software documentation for help.
Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of
the ATLAS 550 will be inoperable during this procedure from the
can cancel the update at any time within the terminal emulation software. (Please consult the
documentation provided by the terminal emulation software to determine how to do this.)
7. View C T
URRENT RANSFER
8. When the transfer is complete, the ATLAS 550 reboots and the
operational.
338
menu and select C
TILITY
menu to XMODEM.
ETHOD
C to start the transfer. Enter Y to confirm the transfer and prepare the
SE ONFIG
S to verify the progress of the current upload.
TATUS
© 2004 ADTRAN, Inc.
or interface, either with a
ADMIN CRAFT
T
ONFIGURATION RANSFER
>S F
RANSFER END ILE
ADMIN
LOGIN
ATLAS 550 System Manual
menu; press <Enter>
. Enter the filename (including
or interfaces. You
CRAFT
screen appears. The unit is now
61200305L2-1A
ADMIN