ADTRAN Atlas 550 System Manual page 146

Section 4 User Interface Guide
M (ST-BRI-4) > A
ODULES
Write security: 5; Read security: 5
Displays the current alarm status of each BRI S/T interface.
L1 D
OWN
M (ST-BRI-4) > A
ODULES
Write security: 5; Read security: 5
Displays the alarm status of the bearer (B) channels and the datalink (D) channel. A hyphen (
no active channel alarm and
M (ST-BRI-4) > C
ODULES
Read security: 5
Displays the channel status of the bearer (B) channels and the datalink (D) channel for each BRI S/T
interface.
M (ST-BRI-4) > C
ODULES
Write security: 5; Read security: 5
Indicates the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
M (ST-BRI-4) > C
ODULES
Write security: 5; Read security: 5
(Channel) Displays the status of individual channels. The following symbols may display:
- Unallocated channel
. Inactive channel
A Active B channel
D Active D channel
M (ST-BRI-4) > C
ODULES
Write security: 5; Read security: 5
Allows the user to personally identify each port with an appropriate name.
M (ST-BRI-4) > C
ODULES
Write security: 5; Read security: 5
Displays the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
M (ST-BRI-4) > C
ODULES
Write security: 3; Read security: 5
Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each port on the Octal BRI
S/T Option Module.
146
> A
LARMS LARMS
A layer one alarm is indicated by an asterisk (*) when the BRI S/T
physical layer is not active. An L1 alarm is present when problems are
detected with the endpoint or a cabling problem.
> C
LARMS HANNEL
indicates an active D channel alarm.
D
U
HANNEL SAGE
U
HANNEL SAGE
U
HANNEL SAGE
ONFIGURATION
ONFIGURATION
ONFIGURATION
© 2004 ADTRAN, Inc.
> P
RT
> C
HA
> P
RT
> P N
ORT AME
ATLAS 550 System Manual
) indicates
–
61200305L2-1B