ADTRAN Atlas 550 System Manual page 324

Section 5 DLP-6
Perform the following steps in the order listed.
1. Connect to the ATLAS 550 using the ETHERNET interface.
If you are not already connected to the unit's
procedure in DLP-3, Setting IP Parameters for the ATLAS 550, to connect to the unit.
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the ATLAS 550, for details).
3. Go to the S U
YSTEM
4. Select M S
ODULE LOT
Select the appropriate module slot to update. The module slot for the ATLAS 550 system controller is
module slot 0.
5. Go to the T
RANSFER
6. Enter into TFTP S
ERVER
7. Enter into TFTP S
ERVER
8. From the R
ESTART
completing the update.
R I
ESTART MMEDIATELY
R A S
ESTART T PECIFIED
select this option, a new field called
that option, enter the time in 24-hour format (such as 23:00:00 for 11:00 pm). Enter the date in
mm-dd-yyyy format (for example, 06-30-2004).
9. Select V C
IEW URRENT
identify any errors encountered during the download.
Refer to the table on the following page for a detailed description of messages found in this field.
10. Select B F
EGIN IRMWARE
module to receive the TFTP upload.
During the TFTP upload, the following status messages display in
indicate the progress of the upload:
C S
ONTACTING ERVER
B TFTP
EGINNING
T
RANSFER
C
OMPLETED
E : F N F
RROR ILE OT
E : A
RROR CCESS
V
IOLATION
324
menu and select U
TILITY
and press <Enter>.
M menu and select TFTP.
ETHOD
IP A , the IP address of the network TFTP server.
DDRESS
F , the full path name and filename of the update file.
ILENAME
S menu, select the time for the module to perform a restart after
CHEDULE
restarts the system immediately after the update is complete.
A U
FTER PDATE
allows you to select when the updated system will restart. If you
D T
ATE AND IME
R
ESTART
U S to verify the progress of the current firmware update or to
PDATE TATUS
U to start the update. Enter Y to confirm the transfer and to set up the
PDATE
Indicates communication with the TFTP network server is trying to be
established with the specified server address in the TFTP S
A field.
DDRESS
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the ATLAS
550 and the TFTP network server.
Indicates the ATLAS 550 successfully received the update file.
Indicates the TFTP network server was unable to locate the specified file
OUND
name or path in the TFTP S
Indicates the TFTP network server denied the ATLAS 550 access to the
given update filename and path. Please verify appropriate user rights are
selected for the specified path.
© 2004 ADTRAN, Inc.
port using Telnet client software, use the
ETHERNET
F ; press <Enter>.
PDATE IRMWARE
displays below the current field. To use
D T
ATE AND IME
C
URRENT
F
ERVER ILENAME
ATLAS 550 System Manual
to
U S
PDATE TATUS
IP
ERVER
field.
61200305L2-1B