ADTRAN Atlas 550 System Manual page 289

ATLAS 550 System Manual
D P (FXO) > U
IAL LAN
Write security: 3; Read security: 5
Defines to the ATLAS 550 whether Direct Inward Dialing (
when configuring the FXO Module for
E
NABLED
be defined:
D P (FXO) > U
IAL LAN
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS 550 from the network if
if is set to
DID E
NABLED
D P (FXO) > U
IAL LAN
Write security: 3; Read security: 5
Strips a selected quantity (choose from
number prior to being forwarded out of the port.
Example: A network port could be set to accept all calls beginning with 9 (9$), and then with
set to , all digits would be sent toward the network except the leading 9.
1
S MSD
TRIP
are subsequently stripped) are used as accept criterion.
D P (FXO) > U
IAL LAN
Write security: 3; Read security: 5
Simplifies the creation of a
endpoint is a function of which endpoint originated the call.
D = 0
EFAULT VALUE
values, all calls are routed based only on the dialed number.
Multiple endpoints can have the same
When creating the
C
dialed numbers to accept.
Example: An application requires that all calls that originate from Port 1 of the ATLAS 550 in Slot 1 be
switched to Port 2 of that same module. Assign a unique
then configure Port 2 to only accept calls from that unique
61200305L2-1B
T > I C
SER ERM FCE
T > I C
SER ERM FCE
.
T > I C
SER ERM FCE
N , 1, 2,
ONE
does not affect Call Accept criteria. All of the digits (including the MSDs that
T > I C
SER ERM FCE
in applications where the criterion for switching calls to a certain
D P
IAL LAN
. The default ID for all endpoints is 0 and all accept numbers is 0. With default
S
OURCE
list, specify a
A
ALL CCEPT
© 2004 ADTRAN, Inc.
> D I
ONFIG IRECT NWARD
) is being used by the network.
DID
operation and the following information must
U T
SER ERM
> DID D
ONFIG IGITS
DID
> S MSD
ONFIG TRIP
and ) of the Most Significant Digits (MSD) of a dialed
3
> S ID
ONFIG OURCE
.
ID
(s) as well as a dialed number or range of
S ID
OURCE
(e.g., 7) to Port 1 of the module, and
S ID
OURCE
(7).
S ID
OURCE
Section 4 User Interface Guide
D
IALING
DID
T
RANSFERRED
is used. This option only displays
S
TRIP
is
MSD
289