ADTRAN Atlas 550 System Manual page 232

Section 4 User Interface Guide
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the slot to use for the
the modules installed in the slots displays. Select the appropriate slot and press <Enter>.
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the port to use for the
types appears. Select the appropriate port and module type, and press <Enter>.
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the slot to use for the second end of a connection. Select this option, and a list of all of the slots
and the modules installed in the slots displays. Pick the appropriate slot and press <Enter>. A
endpoint may also be selected as the service for the connection.
P V
KT OICE
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the port to use for the second end of a connection. When you select this option, a list of ports and
module types appears. Select the appropriate port and module type, and press <Enter>. If a
endpoint is selected for the
P V
KT OICE
voice endpoints will display in the drop down menu after pressing <Enter>.
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the configuration for the
type of module selected in the
module type, please refer to the
resource module.
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies the configuration for the
type of module selected in the
module type, please refer to the
resource module.
D > C
EDICATED MAPS
Write security: 3; Read security: 5
Specifies whether the ATLAS 550 uses active Robbed-Bit Signaling (RBS) on the connection. Selecting
allows the ATLAS 550 to preserve signaling bits between the two endpoints of the connection.
O
N
Selecting ignores the signaling bits of the connection. This selection is automatically set to
O
FF
RBS does not apply. For example, a T1-to-Nx connection is set to
232
/E M > C
REATE DIT APS
connection. When you select this option, a list of all of the slots and
F
ROM
/E M > C
REATE DIT APS
connection. When you select this option, a list of ports and module
F
ROM
/E M > C
REATE DIT APS
/E M > C
REATE DIT APS
T S /S
O LOT
/E M > C
REATE DIT APS
connection. The selections displayed in this field are based on the
F
ROM
option. For detailed information on submenus for a particular
F S
ROM LT
D M
EDICATED APS
/E M > C
REATE DIT APS
connection. The selections displayed in this field are based on the
T
O
option. For detailed information on submenus for a particular
T S
O LT
D M
EDICATED APS
/E M > C
REATE DIT APS
© 2004 ADTRAN, Inc.
> F
ONNECTS ROM
> P
ONNECTS ORT
> T S
ONNECTS O LOT
> P /PEP
ONNECTS ORT
field, the available packet endpoints or packet
ERVICE
> F
ONNECTS ROM
menu discussion for the appropriate network, option, or
> T C
ONNECTS O ONFIG
menu discussion for the appropriate network, option, or
> SIG
ONNECTS
.
O
FF
ATLAS 550 System Manual
S
LT
/S
ERVICE
P
KT
P E
KT
C
ONFIG
61200305L2-1B
or
E
NDPT
or
NDPT
when
O
FF