ADTRAN Atlas 550 System Manual page 221

ATLAS 550 System Manual
R > IP > I
OUTER NTERFACES
Write security: 2; Read security: 2
Configures routing information protocol (RIP) on this interface.
M
ODE
Write security: 2; Read security: 2
Allows RIP to be enabled or disabled on a per-interface basis.
T O
X NLY
R O
X NLY
T R
X AND X
If
RIP/M
P
ROTOCOL
Write security: 2; Read security: 2
(Only visible if RIP is enabled.) Sets the version of RIP being used on this interface. The options are
and
RIP V1 RIP V2
If
RIP V2
M
ETHOD
Write security: 2; Read security: 2
(Only visible if RIP is enabled.) Defines the method used to send RIP route advertisements. The
options are listed below:
N
ONE
S H
PLIT ORIZON
P R
OISON EVERSE
U
PDATES
Write security: 2; Read security: 2
Defines when RIP advertisements are transmitted.
61200305L2-1B
> RIP
RIP advertisements are periodically transmitted, but are not listened to
on this virtual circuit.
RIP advertisements are not transmitted on this virtual circuit, but they
are listened to.
RIP advertisements are periodically transmitted and are listened to on
this virtual circuit.
is ,
O P , M
ODE FF ROTOCOL
. If is used, a new menu,
RIP V2
is used, a user-defined secret may have to be created.
All routes in the router table are advertised through this interface with
no modification of the routing metric.
Only advertises routes not learned through this interface.
All routes are advertised, but the routes learned through this interface
are "poisoned" with an infinite route metric.
© 2004 ADTRAN, Inc.
and will not be visible.
, U
ETHOD PDATE
A
UTHENTICATION
Section 4 User Interface Guide
, opens.
221