ADTRAN Atlas 550 System Manual page 157

ATLAS 550 System Manual
M (E&M-8) > S
ODULES
Read security: 5
Displays the operating port number. There are eight available ports on the Octal E&M Option Module
M (E&M-8) > S
ODULES
Read security: 5
Displays the call status of each voice port. This field displays one of the following messages:
I
NACTIVE
D
ISABLED
U
NKNOWN
I
DLE
E-L A
EAD SSERTED
M-L A
EAD SSERTED
TO
C I P
ALL N ROGRESS
T E-L O
EST EAD
T E-L C
EST EAD
T
EST
T -U
EST NKNOWN
M (E&M-8) > S
ODULES
Read security: 5
Receive Signaling bits have local significance only, and represent signaling between the ATLAS 550
Controller and the voice port if the port is configured in the
.
RBS
M (E&M-8) > S
ODULES
Read security: 5
Transmit Signaling bits have local significance only, and represent signaling between the ATLAS 550
Controller and the voice port if the port is configured in the
.
RBS
M (E&M-8) > T
ODULES
Write security: 4; Read security: 5
These options initiate different types of tests and display test results.
M (E&M-8) > T
ODULES
Write security: 5; Read security: 5
Displays the operating port.
61200305L2-1B
> P
TATUS RT
> S
TATUS TATUS
The port is pre-configured, but the E&M module is not present.
The E&M module is present, but the port is not mapped.
Information about the port is not available.
The selected trunk is configured but currently not in use.
The E-Lead is asserted, indicating a far-end seizure.
An M-Lead current has been detected, indicating a near-end seizure.
The port is configured for Transmission Only mode.
Indicates there is a current, active call on the selected E&M port.
Forces an on-hook situation for testing purposes.
PEN
Forces an off-hook situation for testing purposes.
LOSED
Generic test indicator.
The port is in test mode, but additional information about the active test
is not available.
> R ABCD
TATUS X
> T ABCD
TATUS X
EST
> P
EST ORT
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
. The bit pattern is formatted
D P
IAL LAN
. The bit pattern is formatted
D P
IAL LAN
ESF
ESF
157