ADTRAN Atlas 550 System Manual page 295

ATLAS 550 System Manual
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Indicates which ports of the selected Dual USSI Option Module have been defined in this switched
endpoint (indicated by "!"), in another switched endpoint (indicated by "s"), or in a
(indicated by "n"). This field is read-only. The following characters may display in this field:
0-4 This port is available.
* This port is requesting this port for this connection, but the port is not yet activated.
! This port is used by this endpoint.
This port is used elsewhere in the switched dial plan.
S
S This port is in the switched dial plan and conflicts with this endpoint.
This port is used in one or more dedicated maps.
N
N This port is in one or more dedicated maps, and conflicts with this endpoint.
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Specifies the number of USSI interface ports ATLAS 550 uses for this endpoint.
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Specifies the number to dial on an outgoing call.
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Configures the call type (either
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Allows the outgoing call to be treated as the selected call type. Options include
data calls), (for speech calls), and
V
OICE
D P (USSI) > U
IAL LAN
Write security: 3; Read security: 5
Simplifies the creation of a dial plan in applications where the criterion for switching calls to a certain
endpoint is a function of which endpoint originated the call.
D = 0
EFAULT VALUE
values, all calls are routed based only on the dialed number.
Multiple endpoints can have the same
When creating the
C
dialed numbers to accept.
Example: An application requires that all calls that originate from Port 1 of the ATLAS 550 in Slot 1 be
switched to Port 2 of that same module. Assign a unique
then configure Port 2 to only accept calls from that unique
61200305L2-1B
T > I
SER ERM FCE
T > I
SER ERM FCE
T > I
SER ERM FCE
T > I
SER ERM FCE
or ) used for outgoing calls from this endpoint.
56K 64K
T > I
SER ERM FCE
A
UDIO
T > I
SER ERM FCE
. Zero is the default ID for all endpoints and all accept numbers. With default
S
OURCE
list, specify a
A
ALL CCEPT
© 2004 ADTRAN, Inc.
C > P A
ONFIG ORTS VAILABLE
C > N
ONFIG UMBER OF
C > N
ONFIG UMBER TO
C > C T
ONFIG ALL YPE
C > D C
ONFIG IAL ALL
(for 3.1kHz audio calls).
C > S ID
ONFIG OURCE
.
ID
(s) as well as a dialed number or range of
S ID
OURCE
(e.g., 7) to Port 1 of the module, and
S ID
OURCE
S ID
OURCE
Section 4 User Interface Guide
D
EDICATED
P
ORTS
D
IAL
A
S
(for 56K or 64K
D
IGITAL
(7).
M
AP
295