Mid Case - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(2) Mid Case

Charge Relief Valve
1. Remove the hex. socket head plug (5).
2. Remove the spring guide (3), shim (4), spring (2) and valve
poppet (1).
(When reassembling)
NOTE
• Install valve component, noting the number of shims (4) in
the charge relief valve.
• Be careful not to damage the O-ring.
• When replacing the valves, check and adjust the setting
pressure. (See page 3-S32.)
Hex. socket head plug of
Tightening torque
charge relief valve
(1) Valve Poppet
(2) Spring
(3) Spring Guide
Check and High Pressure Relief Valve
1. Remove the hex. socket head plug (1) and remove the spring
(3) and relief valve assembly (4), (5).
(When reassembling)
• Be careful not to damage the O-ring on the plug.
Hex. Socket head plug of
Tightening torque check and high pressure
relief valve
(1) Plug
(2) O-ring
(3) Spring
Hydraulic Pipe
1. Remove the front loader pipes (4).
2. Disconnect the suction hose (1) and suction pipe (6).
3. Remove the main delivery pipe (3), power steering delivery pipe
(2) and delivery pipe (5).
(When reassembling)
Front loader pipe retaining
nut
Joint bolt for main delivery
Tightening torque
pipe
Joint bolt for delivery pipe
(1) Suction Hose
(2) Power Steering Delivery Pipe
(3) Main Delivery Pipe
3-S111
TRANSMISSION
49 to 59 N·m
5.0 to 6.0 kgf·m
37 to 43 lbf·ft
(4) Shim
(5) Hex.Socket Head Plug
9Y1210824TRS0110US0
59 to 78 N·m
6.1 to 7.9 kgf·m
44 to 57 lbf·ft
(4) Check and High Pressure Relief
Valve Assembly (Forward)
(5) Check and High Pressure Relief
Valve Assembly (Reverse)
9Y1210824TRS0111US0
90.0 to 108 N·m
9.18 to 11.0 kgf·m
66.4 to 79.6 lbf·ft
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
(4) Front Loader Pipe
(5) Delivery Pipe
(6) Suction Pipe
9Y1210824ENS0023US0
KiSC issued 03, 2016 A