Disassembling And Assembling; Separating Front Axle Assembly - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

5. DISASSEMBLING AND ASSEMBLING

[1] SEPARATING FRONT AXLE ASSEMBLY

Propeller Shaft
1. Slide the propeller shaft cover (4) and (8) after removing the
screws (7).
2. Tap out the spring pins (2), (6) and slide the couplings (1), (5)
and then remove the propeller shaft with covers (4), (8).
(When reassembling)
• Apply grease to the splines of propeller shaft (3).
(1) Coupling
(2) Spring Pin
(3) Propeller Shaft
(4) Propeller Shaft Cover
Power Steering Hoses
1. Disconnect the power steering hoses (1), (2) from steering
cylinder.
2. Remove the cylinder cover (3).
(When reassembling)
Power steering hose
retaining nut
Tightening torque
Cylinder cover mounting
screw
(1) Power Steering Hose, RH
(with Red Tape)
(2) Power Steering Hose, LH
(with Blue Tape)
6-S7
FRONT AXLE
(5) Coupling
(6) Spring Pin
(7) Screws
(8) Propeller Shaft Cover
9Y1210824FAS0009US0
25 to 29 N·m
2.5 to 3.0 kgf·m
18 to 21 lbf·ft
61 to 70 N·m
6.2 to 7.2 kgf·m
45 to 52 lbf·ft
(3) Cylinder Cover
9Y1210824FAS0010US0
KiSC issued 03, 2016 A