Wheel Adjustment; Front Wheel - Kubota WSM L3560 Workshop Manual

Table of Contents

L3560, L4060, L4760, L5060, L5460, L6060, WSM

[2] WHEEL ADJUSTMENT

To avoid personal injury:

• When working on slopes or when working with trailer, set the wheel tread as wide as practical for

maximum stability.

• Support tractor securely on stands before removing a wheel.

• Do not work under any hydraulically supported devices. They can settle, suddenly leak down, or be

accidentally lowered. If necessary to work under tractor or any machine elements for servicing or

adjustment, securely support them with stands or suitable blocking beforehand.

• Never operate tractor with a loose rim, wheel, or axle.

Front Wheels (with Four Wheel Drive)

Front tread can not be adjusted.

• Do not turn front discs to obtain wider tread.

• When re-fitting or adjusting a wheel, tighten the bolts to the

following torques then recheck after driving the tractor 200

m (200 yards) and 10 times of shuttle movement by 5 m (5

yards), and thereafter according to service interval. (See

Front wheel mounting nut

(L3560, L4060, L4760)

Tightening torque

Front wheel mounting nut

(L5060, L5460, L6060)

(1) Front Wheel Mounting Nut

9Y1210824GEG0119US0

9Y1210824GEG0120US0

KiSC issued 03, 2016 A

Table of Contents