Kubota WSM L3560 Workshop Manual page 358

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Wiring Harness
1. Disconnect the multi function combination switch connector (1),
side working light connector (6) and main switch connector (4).
2. Disconnect the shuttle switch connector (7) and the foot throttle
wire (3). (ManualTransmission and GST only)
3. Remove the meter panel support (2) and brake pedal rod R.H.
(5).
4. Remove the main ECU connectors (8).
5. Remove the shuttle link (10) and clutch pedal rod (9). (Manual
transmission and GST only)
6. Remove the brake pedal rod L.H. (11) and both sides of support
plates (11).
(1) Multi Function Combination Switch
Connector
(2) Meter Panel Support
(3) Foot Throttle Wire
(4) Main Switch Connector
(5) Brake Pedal Rod R.H.
Seat and Seat Bracket
1. Disconnect the seat switch connector (1) and seat tilt switch
connector (2).
2. Remove the seat (3).
3. Remove the seat suspension (4) together with seat bracket (5).
(1) Seat Switch Connector
(2) Seat Tilt Switch Connector
(3) Seat
3-S39
TRANSMISSION
(6) Side Working Light Connector
(7) Shuttle Switch Connector
(8) Main ECU Connector
(9) Clutch Pedal Rod
(10) Shuttle Link
(11) Brake Pedal Rod L.H.
9Y1210824TRS0002US0
(4) Seat Suspension
(5) Seat Bracket
9Y1210824HYS0018US0
KiSC issued 03, 2016 A