Kubota WSM L3560 Workshop Manual page 391

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Rear Hydraulic Block and Lift Arm Support
1. Remove the rear hydraulic block (3), cover (2) and lift arm
support (1) as a unit.
(When reassembling)
• Apply liquid gasket (Three Bond 1208C or equivalent) to joint
face of the differential case and cover (2).
(1) Lift Arm Support
(2) Cover
Rear Axle
1. Separate the rear axle case from brake case.
(When reassembling)
• Apply liquid gasket (Three Bond 1208C or equivalent) to joint
face of the rear axle and brake case.
Rear axle
case
Tightening torque mounting
screw
and nut
Brake Case
1. Remove the range gear shift lever fulcrum screw.
2. Remove the brake case mounting screws and nuts.
3. Separate the brake case, tapping the brake case lever lightly.
(When reassembling)
• Apply grease to the steel ball seats. (Do not grease
excessively.)
• Apply liquid gasket (Three Bond 1208C or equivalent) to joint
face of the brake cae and transmission case.
• Apply liquid lock to the fulcrum screw.
• Be sure to apply liquid gasket to "A" position.
• Be sure to fix the brake cam and cam plate.
• Before installing the brake case to the transmission case, install
the cam plate to the transmission case.
Brake case mounting screw
and nut
Tightening torque
Fulcrum screw
3-S72
TRANSMISSION
(3) Rear Hydraulic Block
9Y1210824TRS0034US0
48 to 55 N·m
M10 screw 4.9 to 5.7 kgf·m
36 to 41 lbf·ft
M10 nut (9T) 61 to 70 N·m
(Except 6.2 to 7.2 kgf·m
L3560) 45 to 52 lbf·ft
M12 screw 78 to 90 N·m
(Except 7.9 to 9.2 kgf·m
L3560) 58 to 66 lbf·ft
9Y1210824TRS0035US0
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
9Y1210824TRS0036US0
KiSC issued 03, 2016 A