Disassembling Lift Arm Shaft - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(4) Disassembling Lift Arm Shaft

Lift Arm and Lift Arm Shaft
1. Remove the external snap ring (5).
2. Remove the lift arm R.H. (6).
3. Draw out the lift arm shaft (1) and lift arm L.H. (7) as a unit.
4. Remove the collar (4) and O-ring (3).
(When reassembling)
• Align the alignment marks (8) of the lift arm shaft and lift arms.
• Apply grease to the right and left bushings of lift arm support and
O-rings.
• Be careful not to damage the O-rings.
(1) Lift Arm Shaft
(2) Lift Arm Support
(3) O-ring
(4) Collar
8-S23
HYDRAULIC SYSTEM
(5) External Snap Ring
(6) Lift Arm R.H.
(7) Lift Arm L.H.
(8) Alignment Mark
9Y1210824HYS0030US0
KiSC issued 03, 2016 A