Tightening Torques - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-11.)
[ROPS Model]
Joint bolt for PTO delivery pipe
Release fork setting screws (except HST)
[CABIN Model]
Outer roof mounting screw
Cabin mounting bolt and nut
Joint bolt for delivery pipe
[All Models]
Front loader pipe retaining nut
Joint bolt for HST return pipe
Clutch mounting screws
Engine and clutch housing mounting screw
Engine and clutch housing mounting nut
Joint bolt for main delivery pipe
Joint bolt for PTO delivery pipe
Item
Item
Item
N·m
35 to 39
24 to 27
N·m
3.5 to 4.0 0.36 to 0.40
124 to 147 12.6 to 15.0
40 to 49
N·m
90.0 to 108 9.18 to 11.0
88 to 98
24 to 27
78 to 90
103 to 117 10.5 to 12.0
40 to 49
35 to 39
2-S3
CLUTCH
kgf·m lbf·ft
3.5 to 4.0 26 to 28
2.4 to 2.8 18 to 20
kgf·m lbf·ft
2.6 to 2.9
91.2 to 108
4.0 to 5.0 29 to 36
kgf·m lbf·ft
66.4 to 79.6
9.0 to 9.9 65 to 72
2.4 to 2.8 18 to 20
7.9 to 9.2 58 to 66
76.0 to 86.7
4.0 to 4.9 29 to 36
3.5 to 4.0 26 to 28
9Y1210824CLS0003US0
KiSC issued 03, 2016 A