Kubota WSM L3560 Workshop Manual page 256

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Sensor Connectors
1. Disconnect the air flow sensor connector (1), intake throttle
sensor connector (2), electromagnetic pump connector (3) and
EGR valve connector (4).
2. Disconnect the common rail sensor connector (5), suction
control valve connector (6) and camshaft position sensor
connector (7).
3. Disconnect the crankshaft position sensor connector (8).
4. Set aside the main harness to the rear.
(1) Air Flow Sensor Connector
(2) Intake Throttle Sensor Connector
(3) Electromagnetic Pump Connector
(4) EGR Valve Connector
(5) Common Rail Sensor Connector
Steering and Panel Cover
1. Remove the steering wheel (1).
2. Remove the mat (2).
3. Remove the steering post cover 2 (4) and steering post cover 1
(3).
4. Remove the meter panel cover (5).
(1) Steering Wheel
(2) Mat
(3) Steering Post Cover 1
2-S11
CLUTCH
(6) Suction Control Valve Connector
(7) Camshaft Position Sensor
Connector
(8) Crankshaft Position Sensor
Connector
9Y1210824CLS0035US0
(4) Steering Post Cover 2
(5) Meter Panel Cover
9Y1210824CLS0010US0
KiSC issued 03, 2016 A