Others - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(5) Others

Swashplate Position Sensor : For HST
The swashplate position sensor is located above the
regulating valve.
The sensor is linked with the servo piston.
If the servo piston moves (if swashplate is inclined),
the sensor detects its position and signals are sent to the
ECU.
(1) Swashplate Position Sensor
HST Range Gear Shift Lever Sensor: For HST
This sensor (1) is designed to detect the position at
which the HST range gear shift lever changes the speed,
and is mounted at the bottom of the lever.
It has the variable resistor of revolution angle type,
and the maximum resistance value is approximately
5.4 kΩ. It outputs the lever position of L, M, N or H in the
range of approximately 0.3 to 4.6 V.
(1) HST Range Gear Shift Lever
Sensor
HST Pedal Sensor: For HST
The HST pedal sensor is located on the right of the
HST pedal. When the HST pedal is operated, signals are
sent to the ECU.
(1) HST Pedal Sensor
Glow Relay
This tractor has a system in which glow control
controls the coil current that starts or stops the
preheating circuit.
The time required for preheating is adjusted by
means of the coolant temperature sensor.
(1) Glow Relay
9-M25
ELECTRICAL SYSTEM
9Y1210824ELM0037US0
9Y1210824ELM0038US0
9Y1210824ELM0039US0
9Y1210824ELM0040US0
KiSC issued 03, 2016 A