Kubota WSM L3560 Workshop Manual page 421

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Low-pass Valve
IMPORTANT
• Do not adjust or remove the adjustor (2), otherwise the GST
clutch engagement feeling will be changed.
If this valve is disassembled, be sure to check and adjust
the low-pass pressure.
1. Separate the upper body and lower body.
2. Remove the plug (5).
3. Remove the stopper plate (6) and remove the low-pass poppet
(4) and spring (3).
(1) Lock Nut
(2) Adjustor
(3) Spring
Clutch Valve
1. Separate the upper body and lower body.
2. Remove the stopper plate (4) while pushing the plug (1).
3. Remove the spool (2) and spring (3).
(When reassembling)
• Be careful about the direction of the spool (2) and the plugs (1)
referring to the figure.
(1) Plug
(2) Spool
3-S102
TRANSMISSION
(4) Low-pass Poppet
(5) Plug
(6) Stopper Plate
9Y1210824TRS0087US0
(3) Spring
(4) Stopper Plate
9Y1210824TRS0088US0
KiSC issued 03, 2016 A