Pto Clutch - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(3) PTO Clutch

PTO Clutch Disc Wear
1. Measure the thickness of PTO clutch disc with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory specification
Thickness of PTO clutch
disc
Allowable limit
PTO Clutch Plate Wear
1. Measure the thickness of PTO steel plate with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory specification
Thickness of PTO steel
plate
Allowable limit
Flatness of PTO Piston and PTO Steel Plate
1. Place the part on a surface plate.
2. Check it unable to insert a feeler gauge (allowable limit size)
underneath it at least four points.
3. If the gauge can be inserted, replace it.
Flatness of PTO piston Allowable limit
Piston Return Spring Free Length
1. Measure the free length of spring with vernier calipers.
2. If the measurement is less than the allowable limit, replace it.
Factory specification
PTO return spring free
length
Allowable limit
3-S125
TRANSMISSION
1.70 to 1.90 mm
0.0670 to 0.0748 in.
1.55 mm
0.0610 in.
9Y1210824TRS0135US0
1.15 to 1.25 mm
0.045 to 0.049 in.
1.10 mm
0.043 in.
9Y1210824TRS0136US0
0.15 mm
0.0059 in.
9Y1210824TRS0137US0
42.5 to 43.5 mm
1.68 to 1.71 in.
38.25 mm
1.506 in.
9Y1210824TRS0138US0
KiSC issued 03, 2016 A