Monitor Lamp - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

[10] MONITOR LAMP

Parking Brake Switch Continuity
1. Disconnect the connector from the parking brake switch (1) after
turning the main switch "OFF".
2. Measure the resistance across the two terminals.
3. If infinity is not indicated, the switch is faulty.
Resistance
(Across switch In normal state
terminals)
(1) Parking Brake Switch
(2) Connector of Parking Brake Switch
Parking Brake Switch and Wiring Harness
1. Disconnect the connector from the parking brake switch after
turning the main switch "OFF".
2. Turn the main switch "ON" and connect a jumper lead between
the connector terminals of wiring harness.
3. If the parking brake indicator lamp does not light, the panel
circuit or wiring harness is faulty.
(1) Connector of Parking Brake Switch (2) Connector of Wiring Harness
9-S73
ELECTRICAL SYSTEM
Infinity
[A] Manual Transmission / GST
[B[ HST
9Y1210824ELS0095US0
9Y1210824ELS0096US0
KiSC issued 03, 2016 A