Removing Air Conditioner Unit - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(3) Removing Air Conditioner Unit

Stator
1. Remove the lead wire from compressor body.
2. Remove the external circlip (1).
3. Remove the stator (2).
(When reassembling)
• Do not use the circlip again.
• Assemble the circlip for the tapered side to become outside of
front housing.
• The width of expanding of circlip is set is boss of shaft as a
minimum.
• Match and assemble the concave part (3) of the front housing
(5) and the pin (4) of stator.
(1) External Circlip
(2) Stator
(3) Concave Part
Draining Coolant
• See page 10-S34.
Discharging Refrigerant Gas
• See page 10-S17.
10-S47
(4) Pin
(5) Front Housing
9Y1210824CAS0077US0
9Y1210824CAS0078US0
9Y1210824CAS0079US0
KiSC issued 03, 2016 A
CABIN