Kubota WSM L3560 Workshop Manual page 356

L3560, L4060, L4760, L5060, L5460, L6060, WSM
ROPS
1. Remove the plates (2) and the upper frame (1) mounting screws
(8), (9).
2. Remove the top link (3), lift rods (5) and lower links (6).
(When reassembling)
NOTE
• Do not firmly tighten all screws until most components are
attached.
Plate mounting screw (8)
Plate mounting screw (9)
Tightening torque
Lift arm pin mounting nut
Lift arm pin lock nut
(Reference)
Tightening torque Fulcrum bolt and nut (10)
(1) Upper Frame
(2) Plate
(3) Top Link
(4) Lower Frame
(5) Lift Rod
(6) Lower Link
Steering and Panel Cover
1. Remove the steering wheel (1).
2. Remove the mat (2).
3. Remove the steering post cover 2 (4) and steering post cover 1
(3).
4. Remove the meter panel cover (5).
(1) Steering Wheel
(2) Mat
(3) Steering Post Cover 1
3-S37
TRANSMISSION
138 to 147 N·m
14.0 to 15.0 kgf·m
102 to 108 lbf·ft
167 to 196 N·m
17.0 to 20.0 kgf·m
123 to 145 lbf·ft
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
63 to 72 N·m
6.4 to 7.4 kgf·m
47 to 53 lbf·ft
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 102 lbf·ft
(7) Connector
(8) Screw (M14 × 40 mm)
(9) Screw (M14 × 30 mm)
(10) Fulcrum Bolt and Nut
(11) Lock Bolt
9Y1210824TRS0001US0
(4) Steering Post Cover 2
(5) Meter Panel Cover
9Y1210824CLS0010US0
KiSC issued 03, 2016 A