Separating Mid Case From Transmission Case - Kubota L2800 Workshop Manual

L2800, L3400, WSM

(3) Separating MID Case from Transmission Case

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Separating Clutch Housing (HST) from MID Case
1. Place the disassembling stand under the clutch housing case.
2. Remove the clutch housing and MID case mounting screws.
3. Separate the clutch housing and MID case.
(When reassembling)
• Apply liquid gasket (Three bond 1208D or equivalent) to joint face
of clutch housing and MID case
Tightening torque
Brake and Cruise Linkage
1. Remove the damper (1).
2. Disconnect the brake rods (3), (4) and cruise release wire (2).
3. Remove the cruise control rod (5).
4. Remove the range shift rod (6).
(When reassembling)
• Be sure to adjust the cruise release wire (2). (See page H3-
S11.).
(1) Damper
(2) Cruise Release Wire
(3) Brake Rod R.H
Separating MID Case from Transmission Case
1. Place the disassembling stand under the MID case.
2. Remove the MID case and transmission case mounting nuts.
3. Separate the MID case and transmission case.
(When reassembling)
• Apply liquid gasket (Three bond 1208D or equivalent) to joint face
of MID case and transmission case.
Tightening torque
H3-S17
TRANSMISSION (HST TYPE)
Clutch housing and MID 77.5 to 90.2 N·m
case mounting screws and 7.9 to 9.2 kgf·m
nuts 57.2 to 66.5 ft-lbs
(4) Brake Rod L.H
(5) Cruise Control Rod
(6) Range Shift Rod
MID case and 102.9 to 117.6 N·m
transmission case 10.5 to 12.0 kgf·m
mounting nut 75.9 to 86.8 ft-lbs
W1014109
W1028796
W1014601
KiSC issued 08, 2007 A