Scv (Suction Control Valve) - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

(2) SCV (Suction Control Valve)

NOTE
• Firstly check the connector voltage, secondly check the other wires continuity, then finally check the SCV
resistance.
Connector Voltage
1. Disconnect the connector, and turn the main key switch "ON"
position.
2. Measure the voltage with a voltmeter across the terminals
shown in the table below.
3. If the reference value is not indicated as shown in the table
below, check the relating electric circuit.
Main switch at
Voltage
"ON"
(1) SCV (Suction Control Valve)
SCV Resistance
1. Measure the resistance with an ohmmeter across the terminals
shown in the table below.
2. If the reference value is not indicated, the SCV is faulty.
Resistance at 20 °C (68 °F)
(1) Connector (SCV Side)
9-S76
ELECTRICAL SYSTEM
9Y1210824ELS0101US0
Terminal 2 – Approx. battery
chassis voltage
(2) Connector (Harness Side)
9Y1210824ELS0102US0
Terminal 1 – 2 2.60 to 3.15 Ω
9Y1210824ELS0103US0
KiSC issued 03, 2016 A