Kubota WSM L3560 Workshop Manual page 270

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Hydraulic Pipe
1. Remove the front loader pipes (4).
2. Disconnect the suction hose (1) and suction pipe (6).
3. Remove the main delivery pipe (3), power steering delivery pipe
(2) and delivery pipe (5).
(When reassembling)
Front loader pipe retaining
nut
Joint bolt for main delivery
Tightening torque
pipe
Joint bolt for delivery pipe
(1) Suction Hose
(2) Power Steering Delivery Pipe
(3) Main Delivery Pipe
Hydraulic Pipe and Wiring Harness
1. Disconnect the travling speed sensor connector (1).
2. Disconnect the PTO clutch valve connector (2).
3. Disconnect the proportional valve connectors (3).
4. Remove the brake rod R.H. (5).
5. Remove the PTO delivery pipe (4).
6. Disconnect the solenoid valve connector (7).
7. Set aside the main wiring harness to the front.
8. Remove the HST return pipe (6).
(When reassembling)
IMPORTANT
• In installing the connector of the proportional valve, pay
attention to the color of the connector to ensure correct
installation.
Joint bolt for PTO delivery
pipe
Tightening torque
Joint bolt for HST return
pipe
(1) Traveling Speed Sensor Connector
(2) PTO Clutch Valve Connector
(3) Proportional Valve Connector
(4) PTO Delivery Pipe
2-S25
CLUTCH
90.0 to 108 N·m
9.18 to 11.0 kgf·m
66.4 to 79.6 lbf·ft
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
(4) Front Loader Pipe
(5) Delivery Pipe
(6) Suction Pipe
9Y1210824ENS0023US0
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
88 to 98 N·m
9.0 to 9.9 kgf·m
65 to 72 lbf·ft
(5) Brake Rod R.H.
(6) HST Return Pipe
(7) Solenoid Valve Connector
9Y1210824CLS0038US0
KiSC issued 03, 2016 A