Kubota WSM L3560 Workshop Manual page 15

L3560, L4060, L4760, L5060, L5460, L6060, WSM
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels.
4. If a component with danger, warning and caution label(s) affixed is replace with new part, make sure new label(s)
is (are) attached in the same locations(s) as the replace component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressure any bubbles to
outside edge.
I-9
INFORMATION
9Y1210824INI0006US0
9Y1210824INI0007US0
KiSC issued 03, 2016 A