Servicing; Steering Cylinder - Kubota WSM L3560 Workshop Manual

L3560, L4060, L4760, L5060, L5460, L6060, WSM

6. SERVICING

[1] STEERING CYLINDER

Steering Cylinder I.D.
1. Measure the steering cylinder I.D. with a cylinder gauge.
2. If the cylinder I.D. exceed the allowable limit, replace the
cylinder tube.
Factory specification
Steering cylinder I.D.
Allowable limit
Clearance between Rod and Bushing
1. Measure the bushing I.D. with a cylinder gauge.
2. Measure the rod O.D. with a outside micrometer, and calculate
the clearance.
3. If the clearance exceeds the allowable limit, replace as a unit.
Factory specification
Clearance between rod
and bushing
Allowable limit
7-S8
STEERING
55.000 to 55.074 mm
2.1654 to 2.1682 in.
55.100 mm
2.1693 in.
9Y1210824STS0012US0
0.00900 to 0.127 mm
0.000355 to 0.00500 in.
0.135 mm
0.00531 in.
9Y1210824STS0013US0
KiSC issued 03, 2016 A