Kubota WSM L3560 Workshop Manual page 666

L3560, L4060, L4760, L5060, L5460, L6060, WSM
(Continued)
15. "Hold button for 3s more" is displayed (i) : Hold down the
display mode switch for more than 3 seconds.
16. "Complete" is displayed (j) : The setting has been preserved
correctly to the main ECU.
17. If "Not Complete" is displayed, repeat the procedure.
18. Turn off the main switch.
IMPORTANT
• After setting the mode "N", reset the mode "K" and "L". The
tractor does not move normally without resetting mode "K"
and "L". (HST only)
Error Display
ERROR No.71
ERROR No.72
ERROR No.73
ERROR No.75
(a) Mode Selection Display
(b) Information Display
(c) Setting Display-1
(d) Adjusting Display-1
(e) Setting Display-2
(f) Adjusting Display-2
(g) Setting Display-3
9-S28
ELECTRICAL SYSTEM
Fine-adjustment
Range Gear Shift Lever Sensor
HST Pedal Sensor
Swashplate Position Sensor
Throttle Sensor
(h) Setting Display-4
(i) Adjusting Display-3
(j) Correct Preserving Display
(k) Error Display-1
(l) Error Display-2
(m) Error Display-3
9Y1210824ELS0020US0
KiSC issued 03, 2016 A