L3560, L4060, L4760, L5060, L5460, L6060, WSM
Clearance between Bevel Gear Case Boss and Front Axle
Support Bushing (for L4760, L5060, L5460 and L6060)
1. Measure the bevel gear case boss O.D. with an outside
micrometer.
2. Measure the support bushing I.D. and calculate the clearance.
3. If the clearance exceeds the allowable limit, replace it.
Clearance between
Factory specification
bevel gear case boss
and front axle support
Allowable limit
bushing
Bevel gear case boss
Factory specification
O.D.
Front axle support
Factory specification
bushing I.D.
6-S20
FRONT AXLE
0.080 to 0.248 mm
0.0032 to 0.00976 in
1.0 mm
0.039 in.
54.970 to 55.000 mm
2.1642 to 2.1653 in.
55.080 to 55.218 mm
2.1685 to 2.1739 in.
9Y1210824FAS0032US0
KiSC issued 03, 2016 A