Kubota WSM L3560 Workshop Manual page 701

L3560, L4060, L4760, L5060, L5460, L6060, WSM
Shuttle Switch Continuity (For Manual Transmission and GST)
1. Remove the steering post under cover.
2. Disconnected the shuttle switch connector (1).
3. Measure the resistance across four terminal referring to the
table below.
4. If 0 ohm is not indicated, the shuttle switch is faulty.
(1) Shuttle Switch
(2) Connector of Switch Side
(3) Terminal b
Seat Switch
1. Disconnect the seat switch connector (2).
2. Check the continuity with an ohmmeter across the switch
terminals.
3. If it does not conduct or any value is indicated when the switch
is pushed ("ON" seat), the switch is faulty.
4. If infinity is not indicated when the switch is released ("OFF"
seat), the switch is faulty.
Resistance (Across Reference
switch terminals) value
(1) Seat Switch
(2) Seat Switch Connector
9-S63
ELECTRICAL SYSTEM
(4) Terminal y
(5) Terminal l
(6) Terminal r
9Y1210824ELS0068US0
When switch
is pushed 0 Ω
"P"
When switch
is released Infinity
"R"
P: Pushed
R: Released
9Y1210824ELS0069US0
KiSC issued 03, 2016 A