Canon imageRUNNER ADVANCE C5051 Series Service Manual page 430

4
Parts Replacement and Cleaning > Pickup Feed System > Removing the Right Lower Cover > Procedure
Removing the Pickup Assembly Idler Gear
■ Preparations
1) Remove the Cassette1 and Cassette2.
2) Remove the Pickup Roller.
3) Remove the Feed Roller.
■ Procedure
NOTE:
This procedure describes the removing procedure of cassette 1 Pickup Assembly Idler
Gear. Go through the same procedure for the Pickup Assembly Idler Gear of cassette 2.
CAUTION:
Do not touch the surface of Pickup Roller and the Separation Roller.
1) Remove the Pickup Assembly Idler Gear.
• 1 tab
4 Parts Replacement and Cleaning > Pickup Feed System > Removing the Right Lower Cover > Procedure
Removing the Right Lower Cover
■ Preparations
1) Pull the Cassette1 and Cassette2.
■ Procedure
NOTE:
• If the Cassette Pedestal is connected, perform step 1-1).
• If the Cassette Pedestal is not connected, perform step 1-2).
• If the Side Paper Deck is connected, perform step 1-3).
1-1) When the Cassette Pedestal is installed, remove the Right Front Cover 3.
• 1 screw
F-4-342
4-164
Right front cover 3
F-4-343
4-164