Canon imageRUNNER ADVANCE C5051 Series Service Manual page 876

■ NETWORK
COPIER > OPTION > NETWORK
RAW-DATA Setting of received data print mode
Lv.2 Details To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data
or image processing in the case of problem with received image.
Use case When a problem with received image occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to set the value back to "0: Normal print operation" after
recovering from the trouble.
Display/adj/set range 0 to 1
0: Normal print operation, 1: Print with original data without image
processing
Default value 0
RMT-LANG Language setting of remote UI
Lv.2 Details To set the language on remote UI.
Use case Upon user's request
Adj/set/operate method 1) Switch with +/- key, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range ja/en/de/fr/it/es
ja: Japanese, en: English, de: German, fr: French, it: Italian, es:
Spanish
IFAX-LIM No. of max print lines at IFAX reception
Lv.2 Details To set the maximum number of lines for e-mail text to be printed
when receiving IFAX.
Setting of this item can prevent endless printing of the attached file
data in the case of receiving an error e-mail or failure in interpretation
of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail
text without attached file.
Use case When preventing endless print in the case of failure in reception
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: E-mail text not printed, 999: Unlimited
Default value 500
SMTPTXPN Setting of SMTP TX port number
Lv.2 Details To set SMTP transmission port number.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
Default value 25
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
SMTPRXPN Setting of SMTP reception port number
Lv.2 Details To set SMTP reception port number.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
Default value 25
POP3PN Setting of POP3 reception port number
Lv.2 Details To set POP3 reception port number.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
Default value 110
FTPTXPN Specification of SEND port (FTP) number
Lv.2 Details To specify address port (FTP) number for SEND.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
Default value 21
STS-PORT ON/OFF of TOT sync status comctn port
Lv.2 Details To set ON/OFF for Inquiry/Response (sync)-mode status
communication port with T.O.T.
Select "1: ON" in the case of connecting the PC and the machine
with the crossover cable while Service NAVI is used.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> NETWORK> CMD-PORT
CMD-PORT ON/OFF TOTasync command comctn port
Lv.2 Details To set ON/OFF for asynchronous command communication port with
T.O.T.
Select "1: ON" in the case of connecting the PC and the machine
with the crossover cable while Service NAVI is used.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> NETWORK> STS-PORT
8-176
8-176