Canon imageRUNNER ADVANCE C5051 Series Service Manual page 914

COPIER > OPTION > USER
CNCT-RLZ Setting of connection serialize function
Lv.2 Details Connection serialize is a function to assure job grouping function of
imageWARE Output Manager Select Edition V1.0.
The setting to enable this mode can avoid job rearrangement
because the machine does not receive job data from other
connection until it completes job data reception from the current
connection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
COUNTER7 Setting of software counter 7
Lv.1 Details To set counter type for software counter 7 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution No change is available.
Display/adj/set range 0 to 999
0: No registration
Default value 0
COUNTER8 Setting of software counter 8
Lv.1 Details To set counter type for software counter 8 on the Counter Check
screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution No change is available.
Display/adj/set range 0 to 999
0: No registration
Default value 0
2C-CT-SW Set of color counter at 2-color mode
Lv.2 Details To set whether to use the single color counter or full color counter for
count-up in 2-color mode.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Single color counter, 1: Full color counter
Default value JAPAN: 0, Other: 1
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
JA-FUNC ON/OFF of job archive function
Lv.2 Details To set ON/OFF of job archive function.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Changing this mode is not available in service mode, but reference is
available (in service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
JA-JOB Setting of job archive target job
Lv.2 Details To set the job type subject to job archive.
With the job archive function enabled, archive operation is executed
when executing the target job.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Changing this mode is not available in service mode, but reference is
available (in service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0: N/A, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
Default value 0
Related service mode COPIER > OPTION > USER > JA-FUNC
JA-RESTR Setting of job archive limit items
Lv.2 Details To set restriction items for job archive specification.
With job archive function enabled, follow the setting to execute
operation to restrict specification.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Changing this mode is not available in service mode, but reference is
available (in service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
32 specification restrictions with Bit definition
Bit0: Function to obtain image file (0: OFF, 1: ON)
Bit1: Function to compose form registration (0: OFF, 1: ON)
Bit2: Function to edit document (0: OFF, 1: ON)
Default value 0
Related service mode COPIER > OPTION > USER > JA-FUNC
8-214
8-214