Canon imageRUNNER ADVANCE C5051 Series Service Manual page 412

4
Parts Replacement and Cleaning > Fixing System > Removing the Pressure Roller and Pressure Roller Bearing > Procedure
Removing the Pressure Roller and Pressure Roller
Bearing
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.
2) Remove the Fixing Unit.
3) Remove the Film Unit.
■ Procedure
NOTE:
When installing/removing it, do not touch the Pressure Roller.
1) Remove the Fixing Inlet Guide.
• 1 claw
• 1 screw
• 3 hooks
Hook
4 Parts Replacement and Cleaning > Fixing System > Removing the Pressure Roller and Pressure Roller Bearing > Procedure
Hooks
Fixing inlet guide
Claw
F-4-284
CAUTION:
At installation, install it after fitting the 3 hooks to the notches.
2) When installing/removing it, to prevent the Pressure Roller from being damaged, insert the
paper (approx. 5mm) under the Fixing Delivery Lower Guide to make a space between the
Inner Delivery Guide and the Pressure roller.
Paper
About 5mm
thickness
4-146
F-4-285
Inner delivery
guide
Space
Pressure roller
F-4-286
4-146