Canon imageRUNNER ADVANCE C5051 Series Service Manual page 33

1
Product Overvew > Operation > Service Mode > Description display of service mode item
Service Mode
It is possible to browse the usage method of service mode items in service mode.
Following is the changed and added items compared to a conventional machine.
■ Service mode menu
TOP screen
[MODELIST] :
This mode is newly added from this machine.
This mode has the function to browse the usage method of service mode items etc.
New functions described later are available in MODELIST mode.
[MODELIST CLASSIC] :
This is the same mode with a conventional machine.
New functions described later are not available in MODELIST CLASSIC mode.
When [MODELIST] or [MODELIST CLASSIC] is pressed, initial screen of each mode is
displayed.
1 Product Overvew > Operation > Service Mode > Description display of service mode item
■ Description display of service mode item
Enables to display the description of initial screen, large category, middle category and small
category.
Select any from initial screen > large category > middle category > small category, and press [i]
(information button) so that the description of selected item (hereinafter called service mode
contents) is displayed.
e.g.) COPIER > DISPLAY > Version screen
F-1-12
• Service mode contents can be displayed in J / E / F / I / G / S.
• Alike other system software, service mode contents can be upgrade with SST.
1) Press [i]
4) A detailed explanation on the
item will be displayed (usage
scenarios, instructions,
settings range, etc.).
2) Minor item titles
are displayed.
3) Select the desired
minor item and
press [i]
1-17
F-1-13
1-17