Canon imageRUNNER ADVANCE C5051 Series Service Manual page 910

COPIER > OPTION > USER
PR-PSESW Display/hide of output pause button
Lv.1 Details To set whether to display or hide [Pause Printing] button on the
system status/stop screen.
Use case - Upon user's request
- When promptly stopping the print job in operation or under
reservation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
IDPRN-SW Charge target job set of dept mngm cntr
Lv.1 Details To set the job type that advances the department management
counter.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:
PRINT category: Inbox Print, Report Print, Send Local Print, PDL
Print
COPY category: COPY
1:
PRINT category: Report Print, Send Local Print, PDL Print
COPY category: COPY, Inbox Print
Default value 0
P-CRG-LF Set operation at end of Dev Ass'y life
Lv.2 Details To set the operation at the time when the Developing Assembly
reaches the end of its life.
When 1 is set, the Developing Assembly that has reached the end of
its life cannot be used.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not stopped, 1: Stopped
Default value 0
CPRT-DSP ON/OFF of [Print Charge Log] button
Lv.1 Details To set whether to display the [Print Charge Log] button to print the
charge logs on the charge log screen in user mode.
When "1: ON" is set, the button is displayed in Management
Settings> Charge Management> Charge Log Screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
PCL-COPY Set of PCL COPIES command control method
Lv.2 Details To set the binder control method of COPIES command with PCL.
Select whether to use the control method of Canon-made PCL or
use the same control method of non-Canon-made PCL.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: Control method of Canon-made PCL (following the value of
COPIES command that is specified for each page to control on a
page basis)
1: Control method of non-Canon-made PCL (handling the value of
COPIES command, which is specified for page 1 when collating, as
bind figure while the value of COPIES command for the next page or
later is invalid. Same control applies as Canon-made PCL when not
collating)
2 to 65535: For future use
Default value 0
CNT-SW Set default dspl items on charge counter
Lv.1 Details To set default display items of the charge counter on the Counter
Check screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:
Counter 1 - Total 1: 101
Counter 2 - Total (Black 1): 108
Counter 3 - Copy (Full Color + Single Color/1): 232
Counter 4 - Total A (Full Color + Single Color/1): 149
1:
Counter 1 - Total 2: 102
Counter 2 - Copy (Full Color + Single Color/2): 231
Counter 3 - Total A (Full Color + Single Color/2): 148
Counter 4 - Copy (Black 2): 222
Counter 5 - Total A (Black 2): 133
Default value 0
8-210
8-210