Canon imageRUNNER ADVANCE C5051 Series Service Manual page 848

COPIER > FUNCTION > PART-CHK
FAN-ON Operation check of Fan
Lv.1 Details To start operation check of the Fan specified by FAN.
Use case When replacing the Fan/checking the operation
Adj/set/operate Select the item, and then press OK key.
method
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 1 min
Related service mode COPIER> FUNCTION> PART-CHK> FAN
8
Service Mode > COPIER > FUNCTION > PART-CHK
8 Service Mode > COPIER > FUNCTION > PART-CHK
COPIER > FUNCTION > PART-CHK
MTR Specification of operation Motor
Lv.1 Details To specify the Motor to operate.
Use case When replacing the Motor/checking the operation
Adj/set/operate Enter the value, and then press OK key.
method
Caution Be sure not to operate M1, M14, and M22 (with *1 and *2 marks) unless
it is necessary.
Be sure to remove the Toner Container when operating the M9 to M12
Toner Container Rotation Motors. Otherwise, toner may spill in the
machine.
Display/adj/set range 1 to 28
1: Image Skew Correction Motor (Y) (M31) *1
2: Image Skew Correction Motor (M) (M32)
3: Image Skew Correction Motor (C) (M33)
4: Image Skew Correction Motor (Bk) (M34)
5: Developing Motor (Y) (M5)
6: Developing Motor (M) (M6)
7: Developing Motor (C) (M7)
8: Developing Motor (Bk) (M8)
9: Toner Container Motor (Y) (M9) *5
10: Toner Container Motor (M) (M10) *5
11: Toner Container Motor (C) (M11) *5
12: Toner Container Motor (Bk) (M12) *5
13: Drum Motors of all colors (M1 to M4), ITB Motor (M13) *4
14: ITB Displacement Control Motor (M14) *2
15: Primary Transfer Disengagement Motor (M15) *3
16: Cassette 1 Pickup Motor (M16)
17: Cassette 2 Pickup Motor (M17)
18: Multi-purpose Tray Motor (M18)
19: Registration Motor (M19)
20: Duplex Feed Motor (M20)
21: Fixing Motor (M21) *2
22: Not used
23: First & Second Delivery Motor (M23)
24: Reverse Roller Motor (M24)
25: Third Delivery Motor (M25)
26: Waste Toner Stirring Motor (M26)
27: Shutter Motor (M27) *3
28: Laser Shutter Motor (M28) *3
*1: Do not use this because it is the reference for operation of other
motors.
*2: Do not use this; otherwise, it may cause damage.
*3: Installation/uninstallation only. (If it is operated, it may cause
damage.)
*4: The 5 motors operate simultaneously.
*5: Be sure to remove the Toner Container when operating the motors.
Otherwise, toner may spill in the machine.
Default value 0
Related service mode COPIER> FUNCTION> PART-CHK> MTR-ON
8-148
8-148