Canon imageRUNNER ADVANCE C5051 Series Service Manual page 406

4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Actions after Replacement
CAUTION:
If the Hopper Unit is placed sideways, toner may scatter inside the Hopper and it may
cause the operation failure. Thus, stand and put the Hopper Unit on the paper.
CAUTION:
When installing the Hopper, align the cut-off [A] part of Bottle Fixing Ring with the Bottle
Fixing Arm [B] and install it to the host machine.
[B]
4 Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Actions after Replacement
Paper
F-4-264
[A]
F-4-265
CAUTION:
When installing the Toner Tray, align the Rod Lever with the Toner Cover Open/Close
Rod Lever and install it.
Toner cover Open/Close rod lever
Rod lever
CAUTION:
When installing the removed Toner Container, be sure not to shake it.
CAUTION:
When the Main Drive Unit is removed simultaneously, make sure to install the Main
Drive Unit first and then, the Hopper Unit in order. Otherwise, toner supply failure may
occur.
■ Actions after Replacement
When replacing the Developing Assembly, make sure to initialize before installing the Toner
Container.
COPIER > FUNCTION > INSTALL > INISET-K
If install the Toner Container before initialization, T/D ratio cannot set the right value.
4-140
F-4-266
4-140