Canon imageRUNNER ADVANCE C5051 Series Service Manual page 977

Installation■Procedure
Installing■the■Drum■Unit
1)■Remove■the■ITB■Cover.
•■ 2■screws■(to■loosen)
3)■Turn■the■ITB■Pressure■Release■Lever■in■the■direction■of■the■arrow,■and■then■fit■the■projection■to■the■triangle■mark■on■the■
plate■to■release■the■pressure■ITB.
ITB Pressure Release Lever
9
Installation■>■Installation■Procedure■>■Installing■the■Drum■Unit
2)■Check■that■the■ITB■Sub■Pressure■Release■Lever■is■positioned■in■the■direction■of■the■arrow■and■if■not,■turn■it■and■adjust■the■
position.
screw
F-9-14
9 Installation■>■Installation■Procedure■>■Installing■the■Drum■Unit
direction
of the arrow
F-9-16
9-10
ITB Sub Pressure
Release Lever
F-9-15
9-10