Canon imageRUNNER ADVANCE C5051 Series Service Manual page 937

COPIER > OPTION > LCNS-TR
ST-XPS Install state dspl of direct print XPS
Lv.2 Details To display installation state of direct print XPS when disabling the
function with license transfer.
Use case When checking whether direct print XPS is installed
Adj/set/operate method 1) Select ST-XPS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-XPS.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-XPS Trns lcns key dspl of direct print XPS
Lv.2 Details To display transfer license key to use direct print XPS when disabling
the function with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-XPS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-XPS.
Display/adj/set range 24 digits
OF-XPS [Not used]
ST-2600 Inst state dis: scrty func of IEEE2600.1
Lv.2 Details To display installation state of security function of IEEE2600.1 when
disabling the function with license transfer.
Use case When checking whether security function of IEEE2600.1 is installed
Adj/set/operate method 1) Select ST-2600.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-2600.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-2600 Trns lcns key dis: IEEE2600.1 scrty func
Lv.2 Details To display transfer license key to use security function of
IEEE2600.1 when disabling the function with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-2600.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-2600.
Display/adj/set range 24 digits
OF-2600 [Not used]
8
Service Mode > COPIER > OPTION > LCNS-TR
8 Service Mode > COPIER > OPTION > LCNS-TR
COPIER > OPTION > LCNS-TR
ST-NCAPT Install state display of NetCap func
Lv.2 Details To display installation state of network packet capture function when
disabling the function with license transfer.
Use case When checking whether network packet capture function is installed
Adj/set/operate method 1) Select ST-NCAPT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-NCAPT.
Display/adj/set range 0: Not installed, 1: Installed
When operation finished normally: OK!
Default value 0
TR-NCAPT Transfer license key dspl of NetCap func
Lv.2 Details To display transfer license key to use network packet capture
function when disabling the function with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-NCAPT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-NCAPT.
Display/adj/set range License key (24 characters)
OF-NCAPT Lcns deactivation of NetCap function
Lv.2 Details To deactivate the license of network packet capture function when
disabling the function with license transfer.
Display/adj/set range 0: OFF, 1: ON
Default value 0
ST-OPFNT Install status dspl of PCL option font
Lv.2 Details To display the installation status of PCL option font when transfer is
disabled
Use case When checking whether PCL option font is installed
Adj/set/operate method 1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under ST-OPFNT.
Display/adj/set range 0: Not installed
1: Installed
Default value 0
TR-OPFNT Trns lcns key display of PCL option font
Lv.2 Details To display transfer license key to use PCL option font function with
Policy when transfer is disabled.
Use case - When replacing HDD
- When replacing the device
Adj/set/operate method 1) Select TR-OPFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-OPFNT.
Display/adj/set range 24 digits
8-237
T-8-65
8-237