4
Parts Replacement and Cleaning > Image Formation System > Reinstalling the Drum Unit > Procedure
NOTE:
When installing the Drum Unit (Bk) to the host machine, perform the following
procedures.
2-1) Place the half fold paper included in the packaging box on the Developing Assembly
(Bk).Be sure to set the edge of half fold paper over the Toner Collecting Sheet of the
Developing Assembly.
Toner Collecting Sheet
4
Parts Replacement and Cleaning > Image Formation System > Reinstalling the Drum Unit > Procedure
NOTE:
2-2) While the paper is set, install the Drum Unit (Bk) to the host machine.
2-3) Hold the folded portion and pull this paper out to the direction of arrow.
3) Hold the grip part (8 places) with finger lightly and make sure that the Drum Unit is securely
installed.
F-4-186
4-117
Drum Unit (BK)
F-4-187
F-4-188
4-117